OUR COM­PA­NY

WHO WE ARE

The oppor­tu­ni­ties for elec­tro­mo­bi­li­ty are enorm­ous, in envi­ron­men­tal, eco­no­mic and social terms. Up to now, howe­ver, manu­fac­tu­r­ers have lacked effi­ci­ent and auto­ma­ted pro­duc­tion faci­li­ties to be able to manu­fac­tu­re high-vol­ta­ge cable harnes­ses in lar­ge quan­ti­ties and at low cost. At the same time, the pro­duc­tion of the­se cable harnes­ses must meet very spe­cial safe­ty and qua­li­ty requi­re­ments due to the high elec­tri­cal vol­ta­ge and the lar­ge amounts of cur­rent. We are working at full speed and with gre­at suc­cess on pro­duc­tion sys­tems which, with auto­ma­ti­on and con­sis­t­ent­ly high pro­cess accu­ra­cy, enorm­ously redu­ce the pro­duc­tion cos­ts for cable harnes­ses and at the same time achie­ve unit quan­ti­ties for lar­ge-sca­le pro­duc­tion. Metz­ner E‑Mobility GmbH offers a com­ple­te solu­ti­on port­fo­lio for both the pro­ces­sing of high-vol­ta­ge cables and the auto­ma­ted assem­bly of a wide ran­ge of con­nec­tor sys­tems. Thanks to our various auto­ma­ti­on plat­forms with sca­lable and modu­lar exch­an­geable solu­ti­ons, Metz­ner E‑Mobility GmbH imple­ments exact­ly the sys­tems for your needs with invest­ment secu­ri­ty for future requi­re­ments and gro­wing pro­duc­tion volumes. 
Metzner E-Mobility

METZ­NER E‑MOBILITY IN FIGURES

2017 Foun­da­ti­on

More than 50 Satis­fied Customers

20 Employees

30 Repre­sen­ta­ti­ves Worldwide

5 Auto­ma­ti­on Platforms

More than 20 Patents

OUR COR­PO­RA­TE MISSION

QUA­LI­TY

Every day we do our best to meet the demands of our cus­to­mers with high qua­li­ty machi­nes and sys­tems. Becau­se only satis­fied cus­to­mers com­mis­si­on us again or recom­mend us to others. In addi­ti­on, we have the ambi­ti­on to achie­ve the best pos­si­ble results for our cus­to­mers within a finan­ci­al­ly stret­ched framework. 

FLE­XI­BI­LI­TY

We are con­stant­ly revie­w­ing which tech­no­lo­gies and pro­ces­ses are best sui­ted for spe­ci­fic cus­to­mer requi­re­ments and are open to inte­gra­ting unu­su­al methods and tech­ni­ques. To this end, we have a team of expe­ri­en­ced crea­ti­ve and tech­no­lo­gy-ori­en­ted minds who have set them­sel­ves the goal of com­bi­ning theo­ry and prac­ti­ce into a meaningful whole. 
Zukunftsorientierung@100x

FUTURE ORI­EN­TA­TI­ON

In the cour­se of the chan­ge that is curr­ent­ly taking place, par­ti­cu­lar­ly with regard to new dri­ve tech­no­lo­gies, we see the elec­tric dri­ve as a motor that will con­ti­nue to gain ground. In order to meet the requi­re­ments, Metz­ner has deci­ded to bund­le its exis­ting acti­vi­ties in the field of high-vol­ta­ge cable pro­ces­sing in a sepa­ra­te com­pa­ny — Metz­ner E‑Mobility GmbH — and to fur­ther deve­lop the semi-auto­ma­tic machi­nes and solu­ti­ons with a hig­her degree of automation. 

OUR SUC­CESS STORY

2020

Metz­ner builds the first ful­ly auto­ma­tic clo­cking sys­tems for all pro­ces­ses of a cable harness.

2019

Num­e­rous patents for inno­va­ti­ve pro­ces­ses are issued to Metz­ner E‑Mobility.

2018

The Metz­ner E‑Mobility com­pa­ny is founded.

2017

Metz­ner is respon­ding to an increased demand for e‑mobiles by pro­du­cing sca­lable auto­ma­ti­on platforms.

2015

Other pro­ces­ses, such as foil pro­ces­sing and assem­bly of the con­nec­tor parts, are integrated.

2013

The begin­nings of shield machi­ning at Metz­ner start with CS 20 machines.