METZ­NER CRC RANGE

Auto­ma­ti­sche Kabel­ring­wick­ler mit gesteu­er­tem Funktionsablauf

Long cables often have to be coiled into a ring after assem­bly. The Metz­ner CRC series cable ring coiler has been deve­lo­ped for this appli­ca­ti­on. Metz­ner CRC 350 — The cable ring coiler with syn­chro­no­us con­trol, for cable rings up to 350 mm outer dia­me­ter. The cables are auto­ma­ti­cal­ly fed into the coiling man­drels via a gui­de tube, the coiling pro­cess starts and stops pro­gram-con­trol­led. After com­ple­ti­on, the man­drels lower auto­ma­ti­cal­ly, the pro­tec­ti­ve bon­net opens and the finis­hed cable ring can be removed.


The Metz­ner CRC 450 Duo is an auto­ma­tic cable ring coiler with syn­chro­no­us con­trol for cable rings up to 450 mm outer dia­me­ter. With the two coiling pla­tes, the ope­ra­tor remo­ves the finis­hed cable ring while the machi­ne coils the next cable on the other pla­te. This means that coiling takes place wit­hout any wai­ting time. With the Metz­ner CRC 750 you can wind cable rings with an outer dia­me­ter of up to 750 mm. With a per­mis­si­ble coiling weight of up to 80 kg and a coiling inner dia­me­ter of 250 — 600 mm, the CRC 750 is also equip­ped for hea­vy-duty requi­re­ments and can hand­le the enti­re cable spec­trum of the AM 5000 series up to 35 mm cable dia­me­ter. All cable ring coilers also offer the opti­on of ope­ra­ti­on as a stand-alo­ne unit, inde­pen­dent of a cable pro­ces­sing machi­ne for other coiling tasks. Here, the work steps are acti­va­ted via a foot switch. The foot switch con­trols the fol­lo­wing func­tions: Clo­se pro­tec­ti­ve bon­net, start coiling pro­cess, end coiling pro­cess and open pro­tec­ti­ve bonnet.

VARI­ANTS

FEA­TURES

Con­vin­ce yourself!

Wickeldurchmesser

PRO­GRAM-CON­TROL­LED WIN­DING DIAMETER

The dia­me­ter of the cable coils is free­ly pro­gramma­ble and thus desi­gned to meet your requirements.

Startposition

PRE­CISE START­ING POSITION

The start­ing posi­ti­on of the win­ding pla­te and the ten­sio­ning man­drels are pre­cis­e­ly adjustable.

Einspannen

AUTO­MA­TIC CLAMPING

The begin­ning of the cable to be coiled is gui­ded by the man­drels on the coiling pla­te during coiling and is thus auto­ma­ti­cal­ly clamped.

Materialentnahme

ERGO­NO­MIC MATE­RI­AL REMOVAL

By lowe­ring the win­ding man­drels, the mate­ri­al can be remo­ved ergo­no­mic­al­ly at working height.

Bedienung

SIMP­LE OPERATION

Die Bedie­nung der Kabel­ring­wick­ler ist durch eine menü­ge­führ­te Pro­gram­mie­rung sehr verständlich. 

SIMI­LAR PRODUCTS

ANY QUES­TI­ONS?

We would be deligh­ted to assist and advi­se you to find the right solution.

CONT­ACT

HOW TO FIND US