
METZNER EM 100
Single stations for hv cable foil processing
Metzner offers low-cost individual stations in the field of e‑mobility for the entry into high voltage cable processing. For the first time, the EM 101 module offers a solution for removing the cable foil without affecting the cable shield. The automatic processing of high-voltage cable wires also necessitates the connection of various components of the connector system. The Metzner EM 102 takes care of this. The EM 103 allows the cable shield to be opened and cut using a patented process which ensures that there is absolutely no contact with the inner insulation. The EM 103S offers the functionality of the proven EM 103 to meet the requirements of smaller cable wires of up to 8 mm diameter. These cost-effective models cannot be integrated into an automation line and are equipped with only limited traceability functions.
VARIANTS

Metzner EM 101



Metzner EM 102


Metzner EM 103
The Metzner EM 103 uses a patented process to open and cut the cable shield. Any contact with the inner insulation is excluded.


Metzner EM 103S
ALLE TECHNISCHEN DETAILS IM ÜBERBLICK
PDF 698 KB
SPECIAL FEATURES
Convince yourself!
SEMI-AUTOMATIC CABLE PROCESSING
FEATURES
- Removing the outer sheath
- Removing the cable foil
- Mounting the protective sleeve
- Shortening the cable shield
- Remove filling material / inner conductor
SIMILAR PRODUCTS
The Metzner EM 300 platform, along with the EM 100, offers fast process tool changes and faster cycle times for a variety of processes.
The EM 600 is able to combine up to 6 consecutive process tools in one station. After insertion, the cable remains in a fixed position while the tools move to the cable.