METZNER EM 600
High Voltage Cable Processing with up to 6 Exchangeable Tools
The EM 600 can integrate up to six successive process tools in one single station. After insertion, the hv cable remains in a fixed position while the tools move towards the cable to provide optimum protection for the HV cable wires. The total cycle time of an EM 600 station is approx. 35 seconds for all operations of this station, with a total capacity of approx. 400,000 cable ends per year.
ALLE TECHNISCHEN DETAILS IM ÜBERBLICK
PDF 698 KB
QUICK TOOL CHANGE
The platform is so designed either to be loaded and unloaded by an employee or to have the cable wires transferred fully automatically
Two to three EM 600 stations can be easily operated in parallel by just one operator. Since the cycle time is less than 30 seconds, time and resources are reduced.